Inkclaw Phoenix 1.0 Smart Powerbank Tattoo Grip

With the Phoenix 1.0 Smart Tattoo Grip With Battery, Inkclaw emphasized its role as a novelty in the field of professional tattoo equipment. Phoenix 1.0 is not a simple idea of combining the functions of self-locking tattoo grip, tattoo machine power supply, voltage control, and power switch. The main novelty point of Phoenix 1.0 is to bring an idea "Single Handheld Control System", that tattooing and control the power button at the same time with one hand. So we believe this pain point might cause some of you to resonate.  The Phoenix 1.0 is dedicated to all motors machines, and it is forbidden to be used on coil machines. We are going to develop a 2.0 vision for coil machines.  For all the motors machine users, who might not want to upgrade to the wireless pen-shaped machine, but still want to embrace the idea of wireless and maximum freedom of movement. Phoenix 1.0 will be the best gift for you. 

Review Video

Assembled Video

How it works guide

Phoenix 1.0 Smart Tattoo Grip - The most innovative tattoo grip in 2021

1. Diameter 30mm (1.2 IN)
2. Grip net weight: 103g (3.6 Oz)
3. Available voltage: 4V-12V
4. Battery Capacity: 1300 mAh
5. The device can be used for 3-4 hours after charging for 90mins
6. This version 1.0 is dedicated for motors machines. It is forbidden to be used on coil winding machines.
7. The optional connection lines are RCA and DC, and the default option is the RCA line

Manuel Instruction in different languages? Download Here 

How to wrap and sterilizer, and correctly remove tip and needle after using

1. You can clean the grip by using some chemical cleaner, and the copper adjuster can put it into an autoclave if you like.

2. Q: Can I put the phoenix 1.0 grip into autoclave? How do I isolate and sterilize the grip?
A: No you can not put the grip into autoclave but the copper/brass adjuster that one you can put into autoclave if you want. The isolate and sterilize process will be: I personally use Super Sani Wipes along with Cavicide to effectively sterilize and clean this grip after use. Typically I will grab the Super Sani Wipes and I begin wiping down the entire grip as much as I can all around on the outside. After I fully submerge the copper tip of the Phoenix 1.0 into some cavicide as the copper tip does detach from the grip. So after I have fully submerged the copper tip I will have another cup of fresh cavicide and some Q tips readily available and I will dip the Q tips into the fresh cavicide so that I can get the chemical into the middle of the tube where the needle goes and with this method I am able to really saturate and get the cavicide inside the tubing to remove any waste. Once I am certain I have saturated all the inside of the tubing I proceed to wipe down the unit again with some Super Sani Wipes. Once I am confident I have cleaned the entire unit with the wipes and cavicide I will wipe down the entire unit one last time with standard alcohol wipes to remove the heavy chemicals we just used. 

Sterilize in Depth Tutorial Video

Remarks:

If the load current of the tattoo grip is too high because of a mechanical failure, the circuit board will be powered off for protection and shut down automatically within 3 seconds, and it can be restarted after charging again.

Cautions:

The device cannot be put in water or working under too high temperature, or dropped.

Working Status Shortcut

The machine and accessories inside the video are brand new, that is the reason we don't wrap it, the video is for clearly showing the working status. During daily work, we should keep a safe-tattooing attitude, wrap, clean as well as sterilize. 

Operation Video